Free shipping inside European Union on all orders above 499€
My Account
Paint & Lacquers
Paint Pumps, IBC and Drum Heaters
The quality of lacquers and paints depends on not just the quality of the ingredients. The process and equipment through which the inputs are filled, transferred, or emptied at the end of the chain are also critical to the product’s quality. Every detail is crucial, every parameter counts. You have to use the right heating and pumping hardware to prevent serious quality issues and losses.
Rely on the knowledge of industry experts to select tested and proven electric pumps, IBC heaters, and drum heaters. HeatXperts is fully aware of the challenges you face in your industry and has the optimum solution to help you meet your quality and production targets.
Using our drum & IBC heaters in conjunction with FLUX pumps helps the pumping process in the paints and Lacquers industry to become safer, easier, and more flexible.
Some of the applications used to heat and pump in the Paints and Lacquers industry
- Acetone
- Binder
- Colour for crack testing
- Dispersion plaster
- Ethanol
- Lacquers
- Methylenchlorid
- Paints
- Polyester-based paints
- Printing inks
- Solvents
- Solvent-based paints
- Toluene
- Water-based paints
There are 23 products.
-
IBC Pump Kit MINIFLUX
- For pumping out of IBCs directly from the outlet (with standard S60 x 6 thread)
- Simple connection of the pump to the outlet by union nut
- Compact design
- Can be dismantled into two parts via clamp
- Low overall weight of 1.2 kg
- No need to mount pump to top of container
- Does not require access to the container from above
- Ideally combined with commutator motor or compressed-air motor
- Flow rate up to 60L/min
- Viscosity up to 1.000mPas
0 review €1,449.00 4-7 days- For pumping out of IBCs directly from the outlet (with standard S60 x 6 thread)
- Simple connection of the pump to the outlet by union nut
- Compact design
- Can be dismantled into two parts via clamp
- Low overall weight of 1.2 kg
- No need to mount pump to top of container
- Does not require access to the container from above
- Ideally combined with commutator motor or compressed-air motor
- Flow rate up to 60L/min
- Viscosity up to 1.000mPas
-
FLUX Pump Kit F430 500W for Petroleum
- Flow rate up to 65L/min
- Viscosity up to 1.000mPas
- Pump with mechanical seal
- Pump can be taken apart into two parts without tools
0 review €1,099.00 4-7 days- Flow rate up to 65L/min
- Viscosity up to 1.000mPas
- Pump with mechanical seal
- Pump can be taken apart into two parts without tools
-
FLUX Pump Kit F430 for Acids
- Flow rate up to 60L/min
- Viscosity up to 600mPas
- No seal in the liquid area
- No contamination of the medium from lubricants or wear of seal materials possible
- Free from wear
0 review €1,049.00 4-7 days- Flow rate up to 60L/min
- Viscosity up to 600mPas
- No seal in the liquid area
- No contamination of the medium from lubricants or wear of seal materials possible
- Free from wear
-
FLUX Pump Kit F430 Explosion Proof (EX)
- Pump with mechanical seal
- Pump can be taken apart without tools into two parts
- Steel core in the inner tube prevents longitudinal changes at high or low temperatures
- Flow rate up to 50L/min
- Viscosity up to 800mPas
0 review €2,399.00 4-7 days- Pump with mechanical seal
- Pump can be taken apart without tools into two parts
- Steel core in the inner tube prevents longitudinal changes at high or low temperatures
- Flow rate up to 50L/min
- Viscosity up to 800mPas
-
FLUX Pump Kit FP424 Highly Flammable Media - Explosion Proof (EX)
- No seal in the liquid area
- ATEX Explosion Proof (Ex) Protected
- Free from wear
- Relief openings provide the same fluid level inside the pump compared to the drum content
- Flow rate up to 50L/min
- Viscosity up to 800mPas
0 review €2,299.00 4-7 days- No seal in the liquid area
- ATEX Explosion Proof (Ex) Protected
- Free from wear
- Relief openings provide the same fluid level inside the pump compared to the drum content
- Flow rate up to 50L/min
- Viscosity up to 800mPas
-
FLUX Pump Kit FP424 Highly Flammable Media - Explosion Proof (EX)...
- No seal in the liquid area
- ATEX Explosion Proof (Ex) Protected
- Free from wear
- Relief openings provide the same fluid level inside the pump compared to the drum content
- Infinitely speed adjustment
- Flow rate up to 50L/min
- Viscosity up to 800mPas
0 review €2,599.00 4-7 days- No seal in the liquid area
- ATEX Explosion Proof (Ex) Protected
- Free from wear
- Relief openings provide the same fluid level inside the pump compared to the drum content
- Infinitely speed adjustment
- Flow rate up to 50L/min
- Viscosity up to 800mPas
-
Honey Drum Heater for 200L drums
- Perfect for melting honey
- Minimizes fluid viscosity and prevents crystallization
- Helps in rapid and uniform heating of a standard 200 liter drum
- Also perfect for heating water, sugary solutions or oil-based fluids
- Prevents project setbacks and unnecessary product waste
- CE marked and approved digital controller makes it safe and easy to use
0 review €1,399.00 1-3 days- Perfect for melting honey
- Minimizes fluid viscosity and prevents crystallization
- Helps in rapid and uniform heating of a standard 200 liter drum
- Also perfect for heating water, sugary solutions or oil-based fluids
- Prevents project setbacks and unnecessary product waste
- CE marked and approved digital controller makes it safe and easy to use
-
IBC Immersion Heater 0-90°C
- Helps diffuse heat rapidly and directly to the outlet valve
- Designed to provide even heat distribution up to 90°C
- Accurate and easy temperature adjustment
0 review €1,399.00 1-3 days- Helps diffuse heat rapidly and directly to the outlet valve
- Designed to provide even heat distribution up to 90°C
- Accurate and easy temperature adjustment
-
Jessberger Drum Pump Set JP-AIR1 for flammable media
- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 78L/min
- Viscosity up to 400mPas
- 300W Air driven
- Fits any 200L Drum or 1000L IBC
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
0 review €1,999.00 2-5 days- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 78L/min
- Viscosity up to 400mPas
- 300W Air driven
- Fits any 200L Drum or 1000L IBC
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
-
Jessberger Drum Pump Set JP-AIR2 for flammable media
- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 80L/min
- Viscosity up to 600mPas
- 600W Air driven
- Fits any 200L Drum
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
0 review €2,099.00 2-5 days- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 80L/min
- Viscosity up to 600mPas
- 600W Air driven
- Fits any 200L Drum
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
-
Jessberger Drum Pump Set JP-AIR3 for flammable media
- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 91L/min
- Viscosity up to 600mPas
- 400W Air driven motor
- Fits any 200L Drum
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
0 review €1,949.00 2-5 days- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 91L/min
- Viscosity up to 600mPas
- 400W Air driven motor
- Fits any 200L Drum
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
-
Jessberger Drum Pump Set ATEX JP-440 for flammable media
- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 82L/min
- Viscosity up to 400mPas
- Fits any 200L Drum or 1000L IBC
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
0 review €2,399.00 2-5 days- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 82L/min
- Viscosity up to 400mPas
- Fits any 200L Drum or 1000L IBC
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes