FLUX Pump Kit F430 for Acids

Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Compromising drum pump F 424/F 430 sealless or with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland.

The FEM 4070 motor has a continuously variable speed for different flow rates and a capacity of 500 watts. The ergonomic handle ensures a safe one-handed operation of the rotary switch to start the pump and the control knob for speed adjustment. It offers an optimal overload protection in all speed ranges and is convincing with its compact design, low weight and mainly by its low noise level.

The FLUX drum pumps operate on the principle of the axial-impeller pumps. The pump unit consists of a drive motor and pump. The motor drives the drive shaft via a coupling. At the end of the drive shaft there is a propeller-like pump impeller (rotor). The rotor must be completely covered with the medium that the pump can work. With the rotation the medium is axially transferred to the outlet, i.e. parallel to the pump shaft.

This pre-assembled drum/IBC pump kit is a complete plug and play kit where everything you need to get started is included in the package. Simply unpack, install and turn the power on and you are ready to use your new electrical drum & IBC pump.

Great benefits:

• Easy disassembly
• Universally and flexible applicable
• Easy to clean as no medium can get into the inner tube
• No carrying-over of the medium - one pump can be used for different media
• Low noise level
• With infinitely speed adjustment
• Compact design
• Low weight
• Awarded with the iF Design Award

Drum & IBC pump media examples:

• Diesel (up to 40 °C)
• Boric acid
• Fruit acids
• Phosphoric acid (up to 50%)
• Hydrochloric acid (up to 30%)
• Sulfuric acid (up to 40%)

Suitable for:

• Chemistry
• Paints and lacquers
• Water treatment
• Agriculture
• Petro Chemistry
• Surface technology
• Other industries

Technical Data:

• Flow rate: max. 60 l/min(*1)
• Delivery head: max. 9,5 mwc
• Viscosity: min. 1 mPas - max. 600 mPas
• Outer tube diameter: max. 40 mm
• Immersion length: 1000, 1200
• Materials outer tube: Polypropylene
• Media / Fluids: Alkalis, Acids
• Seal: Sealless or with mechanical seal
• Container: 1000 l IBC, 200 l drums

*1 - The max. flow rate is achieved in the mentioned configuration with the medium water at 20°C and discharge height = height of outlet.

This Drum Pump Kit contains:

• Drum pump F 430 PP-40/33 in polypropylene (PP) (max. 40 l/min)
• Commutator motor FEM 4070, 230 Volt, 50 Hz, 500 Watt
• PVC hose DN 19, 2 m long
• Hand nozzle polypropylene (PP)
• Compression gland polypropylene (PP) conductive