FLUX Pump Kit F430 500W for Petroleum

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Compromising drum pump F 430, outer tube material aluminum, with commutator motor FEM 4070 (500 Watt). Furthermore are enclosed: hose, hand nozzle and compression gland. 

The FEM 4070 motor has a continuously variable speed for different flow rates and a capacity of 500 watts. The ergonomic handle ensures a safe one-handed operation of the rotary switch to start the pump and the control knob for speed adjustment. It offers an optimal overload protection in all speed ranges and is convincing with its compact design, low weight and mainly by its low noise level. 

The FLUX drum pumps operate on the principle of the axial-impeller pumps. The pump unit consists of a drive motor and pump. The motor drives the drive shaft via a coupling. At the end of the drive shaft there is a propeller-like pump impeller (rotor). The rotor must be completely covered with the medium that the pump can work. With the rotation the medium is axially transferred to the outlet, i.e. parallel to the pump shaft.

This pre-assembled drum/IBC pump kit is a complete plug and play kit where everything you need to get started is included in the package. Simply unpack, install and turn the power on and you are ready to use your new electrical drum & IBC pump.

Great benefits:

• Easy disassembly
• Universally and flexibly applicable
• Easy to clean as no medium can get into to inner tube
• No carrying-over of the medium - one pump can be used for different media
• Also for adhesive media
• Also for liquids that crystallize or harden
• Low noise level
• With infinitely speed adjustment
• Compact design
• Low weight
• Awarded with the iF Design Award

Drum & IBC pump media examples:

• Diesel (up to 40 °C)
• Heating oil
• Hydraulic oil
• Machine oil
• Engine oil

Suitable for:

• Petro Chemistry
• Other industries

Technical Data:

• Flow rate: max. 80 l/min(1)
• Delivery head: max. 12 mwc
• Viscosity: min. 1 mPas - max. 1000 mPas
• Outer tube diameter: max. 41 mm
• Immersion length: 1000, 1200
• Materials outer tube: Aluminum
• Media / Fluids: Petroleum products
• Seal: with mechanical seal
• Container: 1000 l IBC, 200 l drums

1 - The max. flow rate is achieved in the mentioned configuration with the medium water at 20°C and discharge height = height of outlet.

This Drum Pump Kit contains:

• Drum pump F 430 AL-41/38 in aluminum
• Commutator motor FEM 4070, 230 Volt, 50 Hz, 500 Watt (max. 65 l/min)
• Petroleum hose DN 25, 2 m long
• Hand nozzle aluminum
• Compression gland polypropylene