Free shipping inside European Union on all orders above 499€
My Account
Petrochemical Industry
Petrochemical Pumps and Heaters
Petrochemical products are not only expensive to process, they also place special demands on the filling, heating and decanting process. Gasoline producers, for example, need to control octane number (RON/MON), vapour pressure (RVP), distillation points, and other parameters.Whether it’s kerosene or turpentine, petroleum or propanol, AdBlue® or other additives that you need to heat, transfer, metre, or decant, HeatXperts has you covered.
Being the suppliers of specialty industrial equipment across the EU, we know the value of energy sources and how to heat, metre, transfer, and fill petrochemical products in a cost-effective, flexible, safe, and sustainable way.
Minimise product giveaway and improve quality by using our best in-class range of petrochemical pumps, drum heaters, and IBC heaters. In HeatXperts, you will find a competent partner who can guarantee top reliability and precision. Using our drum & IBC heaters in conjunction with FLUX pumps helps the pumping process in the petrochemistry industry to become safer, easier, and more flexible.
Browse our range of best-in-class heating and pumping products for the petrochemistry sector. Please do not hesitate to contact us if you have any queries.
Some of the heating and pumping applications in the Petrochemistry industry
- AdBlue®
- Additives
- Antifreeze
- Coolants
- Diesel
- Fats
- Fuels
- Kerosene
- Oils
- Petrol
- Petroleum
- Propanol
- Solvents
- Special lubricants
- Turpentine
There are 56 products.
-
Jessberger Drum Pump Set ATEX JP-460 for flammable media
- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 93L/min
- Viscosity up to 600mPas
- Fits any 200L Drum or 1000L IBC
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
€1,719.00 2-4 days- Perfect for flammable liquids in hazardous environments.
- Flow rate up to 93L/min
- Viscosity up to 600mPas
- Fits any 200L Drum or 1000L IBC
- Pump tube made of stainless steel 316Ti
- Easy disassembling for quick cleaning of the pump tubes
-
Jessberger Drum Pump Set JP-280 PP EPDM for Alkaline Media
- Perfect for alkalis, lyes, and cleaning agents
- Flow rate up to 112L/min
- Viscosity up to 1000mPas
- Fits any 200L Drum or 1000L IBC
- PP pump tube with EPDM seals for alkaline resistance
- Easy disassembling for quick cleaning of the pump tubes
€899.00 2-4 days- Perfect for alkalis, lyes, and cleaning agents
- Flow rate up to 112L/min
- Viscosity up to 1000mPas
- Fits any 200L Drum or 1000L IBC
- PP pump tube with EPDM seals for alkaline resistance
- Easy disassembling for quick cleaning of the pump tubes
-
Jessberger JP-810.8 Air-Operated Diaphragm Pump ¼" 7 l/min — ATEX...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Three housing materials: PP, POM and PVDF — each with matched standard diaphragm and seal configuration
- Flow up to 7 l/min, viscosity up to 5,000 mPas, passes solids to 2 mm — ¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 6 bar) — requires no electrical supply or speed controller
€215.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Three housing materials: PP, POM and PVDF — each with matched standard diaphragm and seal configuration
- Flow up to 7 l/min, viscosity up to 5,000 mPas, passes solids to 2 mm — ¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 6 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.35 Air-Operated Diaphragm Pump ½" 35 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 35 l/min, viscosity up to 15,000 mPas, passes solids to 3 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 7 bar) — requires no electrical supply or speed controller
€375.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 35 l/min, viscosity up to 15,000 mPas, passes solids to 3 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 7 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.20 Air-Operated Diaphragm Pump 3/8" 20 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, POM, PVDF and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 20 l/min, viscosity up to 10,000 mPas, passes solids to 2.5 mm — 3/8" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 7 bar) — requires no electrical supply or speed controller
€315.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, POM, PVDF and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 20 l/min, viscosity up to 10,000 mPas, passes solids to 2.5 mm — 3/8" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 7 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.56 Air-Operated Diaphragm Pump ½" 55 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 55 l/min, viscosity up to 15,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€475.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 55 l/min, viscosity up to 15,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.60 Air-Operated Diaphragm Pump ½" 65 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 65 l/min, viscosity up to 20,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€515.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 65 l/min, viscosity up to 20,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.90 Air-Operated Diaphragm Pump ¾" 100 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 100 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — ¾" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€575.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 100 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — ¾" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.120 Air-Operated Diaphragm Pump 1" 120 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 120 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€575.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 120 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.160 Air-Operated Diaphragm Pump 1" 170 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€829.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.171 Air-Operated Diaphragm Pump 1" 170 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Two housing materials: PP and PVDF — covering aqueous chemicals, acids, alkalis and halogenated solvents
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€745.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Two housing materials: PP and PVDF — covering aqueous chemicals, acids, alkalis and halogenated solvents
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.250 Air-Operated Diaphragm Pump 1¼" 250 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 250 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€949.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 250 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller