IBC Immersion Heater 0-90°C

In order to catalyze industrial processes and boost production, liquid management needs to be effortless. Most fluids tend to solidify or become more viscous when contained, transported or stored at room temperature. With IBC Immersion Heaters, you have one less thing to worry about.

Our IBC (or Intermediate Bulk Container) Immersion Heaters are submersible heaters that screw directly onto container lids to provide safe and uniform heating. They provide maximum thermal efficiency and have an overall improved heat rate as compared to standard wrap-around heaters. 

Our immersion heater for IBC is made of stainless steel tube element AISI 316L (1.4404) and is IP65 to cope with outdoor environments. The diameter of the heater fits the top opening of IBC tanks and has an active heating zone that requires a standard 1000 liter IBC tank to be at least half-filled. 

The entire surface of the immersion rod radiates heat which makes the emission quick and evenly distributed. This ensures that the liquid in immediate contact does not burn or overheat. There is also no room for concern regarding liquid damage to the key controls of the heater, since all the components are thoroughly sealed off.

Our immersion heater comes with a fixed handle, which makes it easy to lift in and out of the tank and a breeze to hang when not in use. It provides heat directly, and instantly to the outlet valve, thus the wait time is essentially negligible and the ramp functionality is super. This high-speed transfer allows this immersion heater to stand abreast with satellite and space technology. 

The industrial-grade coating around the immersion tube ensures that no liquid sticks to the surface, leaving the instrument good for multiple uses and easy to clean. Our IBC Immersion Heater sports digitally controlled temperature setting which facilitates easy usage and handling. It also has a low surface load designed specifically for heating sensitive substances. 

Bid adieu to downtime and get your batching process underway with maximum efficacy and quick results. Order your IBC Immersion Heater from us now!

Features:

• Works well for mild acids, alkaline mixtures, water and oil based products
• Provides uniform heating up to 90°C
• CE marked and approved
• Lightweight and durable equipment
• Direct heat emission to the outlet valve
• Easy to clean and store when not in use
• Digitally-controlled temperature makes it easy to operate
• Optimal heating mechanism to ensure safety and uniform heating
• Designed to provide maximum heating area

Technical specification:

• Surface load 2,2W/cm²
• Power 2000W
• Supply 230V 1-phase
• Length element 950mm
• Diameter element ø100mm
• Heated zone 300mm
• Low surface load designed for heating sensitive substances
• Integrated PT100 sensor
• Connection box IP65
• Minimum level of liquid during heating 500mm (half full)
• Cable between heater and control unit about 2800mm
• Digital controller 0-90°C
• Rubber cable 1,6m H07RN-F (3G1.5 mm²) with grounded plug type Schuko
• Earth circuit breaker not included (We assume that the 230V socket is protected by earth circuit breakers)
• CE manual