FLUX Pump Kit F430 800W for Petroleum

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Compromising drum pump F 430, outer tube material aluminum and with commutator motor F 457 (800 Watt). Furthermore are enclosed: hose, hand nozzle and compression gland.

With 800 Watt the motor F 457 is the most powerful commutator motor. The handy commutator motor in compact design has a very good air cooling and is convincing with its low noise level. It is optionally available with an integrated no-volt release that prevents an accidental start and thus guarantees an optimal safety. Additionally, the motor F 457 EL has an easy to handle electronic speed adjustment to regulate the delivery rate.

The FLUX drum pumps operate on the principle of the axial-impeller pumps. The pump unit consists of a drive motor and pump. The motor drives the drive shaft via a coupling. At the end of the drive shaft there is a propeller-like pump impeller (rotor). The rotor must be completely covered with the medium that the pump can work. With the rotation the medium is axially transferred to the outlet, i.e. parallel to the pump shaft.

This pre-assembled drum/IBC pump kit is a complete plug and play kit where everything you need to get started is included in the package. Simply unpack, install and turn the power on and you are ready to use your new electrical drum & IBC pump.

Great benefits:

• Easy disassembly
• Universally and flexibly applicable
• Easy to clean as no medium can get into to inner tube
• No carrying-over of the medium - one pump can be used for different media
• Also for adhesive media
• Also for liquids that crystallize or harden
• Most powerful commutator motor
• Low noise level
• F 457 EL: with infinitely speed adjustment

Drum & IBC pump media examples:

• Diesel (up to 40 °C)
• Heating oil
• Hydraulic oil
• Machine oil
• Engine oil

Suitable for:

• Petro Chemistry
• Other industries

Technical Data:

• Flow rate: max. 80 l/min(*1)
• Delivery head: max. 12 mwc
• Viscosity: min. 1 mPas - max. 1000 mPas
• Outer tube diameter: max. 41 mm
• Immersion length: 1000, 1200
• Materials outer tube: Aluminum
• Media / Fluids: Petroleum products
• Seal: with mechanical seal
• Container: 1000 l IBC, 200 l drums

*1 - The max. flow rate is achieved in the mentioned configuration with the medium water at 20°C and discharge height = height of outlet.

This Drum Pump Kit contains:

• Drum pump F 430 AL-41/38 in aluminum
• Commutator motor F 457, 230 Volt, 50 Hz, 800 Watt (max. 80 l/min)
• Petroleum hose DN 25, 2 m long
• Hand nozzle aluminum
• Compression gland polypropylene