Jessberger Drum Pump Set JP-280F for Low Viscous Foods

Drum Pump Set with an electric motor for thin-viscous foods.

The JP-280 Drum pump set is a preassembled drum pump set for 200L drums (immersion length 1000 mm). The JP-280 drum and IBC pump is suitable for thin-viscous foods like malic acid, pineapple juice, protein solutions, dextrose (grape sugar), juice, oils, cider, etc. 

This pre-assembled drum pump set is a complete plug-and-play kit where everything you need to get started is included in the package. Simply unpack, install and turn the power on and you are ready to use your new electrical drum pump.

The drum pump motor is characterized not only by its light weight (3,8 kg) but also by its elegant and ergonomic design and ease of use. The non-stationary and stationary usable drive is particularly suitable for intermittent operation. The internally ventilated motor provides optimal air cooling, and a low noise level and ensures high operational safety and long durability.

The motor housing made of polypropylene ensures high chemical resistance when aggressive vapors of acids and alkalis are present.

The pump tube is made of Stainless Steel 316Ti. These tubes are used for thin fluid food such as fruit juices, milk, edible oils and all neutral, slightly aggressive liquids such as diluted acids, alkalies or detergents, and for all media that are mentioned at aluminium tubes. 

• Drive shaft: Stainless steel 316Ti
• Media temperature: max. 90°C (with PTFE rotor),
• max. 120°C (with rotor made of stainless steel block)

On the drum pump housing, an integrated low voltage release on/off switch is installed. This switch is intended to prevent an uncontrolled start of the drum pump motor after a power failure or voltage drop and thus guarantees maximum safety. 

The Jessberger drum pumps operate on the principle of the axial-impeller pumps. The pump unit consists of a drive motor and pump. The motor drives the drive shaft via a coupling. At the end of the drive shaft, there is a propeller-like pump impeller (rotor). The rotor must be completely covered with the medium so that the pump can work. With the rotation, the medium is axially transferred to the outlet, i.e. parallel to the pump shaft.

Each of our drum pump sets consists of an electric drum pump motor, a pump tube suitable for the application, a two-meter media-proof dispensing hose, and a nozzle, which facilitates filling and transferring.

Drum pump media examples:

• Thin-viscous foods
• Malic acid
• Pineapple juice
• Protein solutions
• Dextrose (grape sugar)
• Juice
• Oils
• Cider

Suitable for:

• Foods
• Water Treatment
• Other industries

Technical data:

JP-280 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.

Pump tube:

• Stainless steel 316Ti, outer-Ø 41 mm,
• shaft stainless steel,
• Connection thread G 1¼”
• Hose connection 1″ (DN 25)
• 2 m Food grade hose 1″ (DN 25)
• 2 Hose clamps stainless steel
• 1 Stainless steel nozzle 1″