Free shipping inside European Union on all orders above 499€
My Account
Water Treatment Industry
Water Treatment Pumps and Heaters
Pumps and heaters are critical components of water treatment plants and facilities. Pumps move water from one place to another and provide the extra pressure sometimes needed to perform certain treatment processes. They also inject water treatment chemicals, supply compressed air, and move treated water to its point of use.
Heaters are used in water/wastewater facilities where proper and economical heating is an essential step in water treatment. Whether it is sewage, oils and polymers, acids, alkalis, or concentrates that you need to pump, store, heat, or transfer, HeatXperts have the right solution for your needs.
Browse our range of water treatment pumps and heaters including dynamic sealing pumps, torque flow pumps, mixed-flow pumps, multistage pumps, drum heaters, IBC heaters, and more. Our products help you ensure compliance with the health and environmental standards and deliver uncompromising water quality.
Using our drum & IBC heaters in conjunction with FLUX pumps helps the pumping process in the water treatment industry to become safer, easier, and more flexible.
Some of the heating and pumping applications in the water treatment industry
- Acid wastewater
- Caustic water
- Citric acids
- Concentrations
- Condensate water
- Different acids
- Drain water
- Ferric chloride
- Flocculants
- Hydraulic oil
- Polymer
- Sewage
- Wastewater
- Water
There are 60 products.
-
Jessberger JP-810.20 Air-Operated Diaphragm Pump 3/8" 20 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, POM, PVDF and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 20 l/min, viscosity up to 10,000 mPas, passes solids to 2.5 mm — 3/8" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 7 bar) — requires no electrical supply or speed controller
€315.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, POM, PVDF and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 20 l/min, viscosity up to 10,000 mPas, passes solids to 2.5 mm — 3/8" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 7 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.56 Air-Operated Diaphragm Pump ½" 55 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 55 l/min, viscosity up to 15,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€475.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 55 l/min, viscosity up to 15,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.60 Air-Operated Diaphragm Pump ½" 65 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 65 l/min, viscosity up to 20,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€515.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 65 l/min, viscosity up to 20,000 mPas, passes solids to 3.5 mm — ½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.90 Air-Operated Diaphragm Pump ¾" 100 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 100 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — ¾" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€575.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 100 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — ¾" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.120 Air-Operated Diaphragm Pump 1" 120 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 120 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€575.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — each with matched standard diaphragm and seal configuration
- Flow up to 120 l/min, viscosity up to 25,000 mPas, passes solids to 4 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.160 Air-Operated Diaphragm Pump 1" 170 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€829.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.171 Air-Operated Diaphragm Pump 1" 170 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Two housing materials: PP and PVDF — covering aqueous chemicals, acids, alkalis and halogenated solvents
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€745.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Two housing materials: PP and PVDF — covering aqueous chemicals, acids, alkalis and halogenated solvents
- Flow up to 170 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.250 Air-Operated Diaphragm Pump 1¼" 250 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 250 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€949.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Aluminium housing — matched internal configuration for solvents, fuels, oils and non-aqueous hydrocarbons
- Flow up to 250 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.252 Air-Operated Diaphragm Pump 1¼" 250 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Three housing materials: PP, PVDF and AISI 316 — covering aqueous chemicals, acids, alkalis, oxidising agents and halogenated solvents
- Flow up to 250 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€949.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Three housing materials: PP, PVDF and AISI 316 — covering aqueous chemicals, acids, alkalis, oxidising agents and halogenated solvents
- Flow up to 250 l/min, viscosity up to 35,000 mPas, passes solids to 7.5 mm — 1¼" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.400 Air-Operated Diaphragm Pump 1½" 380 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — full range of chemical compatibility in a single platform
- Flow up to 380 l/min, viscosity up to 40,000 mPas, passes solids to 8 mm — 1½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€1,175.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — full range of chemical compatibility in a single platform
- Flow up to 380 l/min, viscosity up to 40,000 mPas, passes solids to 8 mm — 1½" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.700 Air-Operated Diaphragm Pump 2" 700 l/min —...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — full chemical compatibility range at 2" scale
- Flow up to 700 l/min, viscosity up to 50,000 mPas, passes solids to 8.5 mm — 2" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€2,005.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Four housing materials: PP, PVDF, ALU and AISI 316 — full chemical compatibility range at 2" scale
- Flow up to 700 l/min, viscosity up to 50,000 mPas, passes solids to 8.5 mm — 2" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
-
Jessberger JP-810.1050 Air-Operated Diaphragm Pump 3" 1050 l/min...
- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Three housing materials: PP, ALU and AISI 316 — the largest standard AODD pump in the JP-810 series
- Flow up to 1050 l/min, viscosity up to 55,000 mPas, passes solids to 12 mm — 3" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller
€6,295.00 2-4 days- Air-operated double diaphragm (AODD) pump, ATEX Zone 2 certified — no electrical ignition source in the fluid zone
- Three housing materials: PP, ALU and AISI 316 — the largest standard AODD pump in the JP-810 series
- Flow up to 1050 l/min, viscosity up to 55,000 mPas, passes solids to 12 mm — 3" BSP connections
- Self-priming to 9.8 m wet suction lift — runs dry without damage, no mechanical seal
- Adjustable flow via air pressure (max. 8 bar) — requires no electrical supply or speed controller