Silicone Drum Heater Band Eco 330-930W | Gentle Heating, 25-200 L Drums

Silicone Drum Heater Band - Eco | 330-930 W

fiber_manual_record In stock Delivery in 4-6 days
  • Straps directly onto a steel drum with a hook and spring — no jacket, no lid, fitted or moved in a minute
  • Low power density that raises and holds temperature slowly, for products that must not be pushed
  • Capillary thermostat in its own control box on every band, adjustable 0–120 °C
  • Five sizes covering 25 L to 200 L drums, in 125 mm and 180 mm band widths
  • 230 V · 330–930 W · IP40 · Class II double-insulated · 2 m HO7RN-F cable
€199.00
Tax excluded
Model
Quantity
Need more info?

icon-delivery.svg
Hassle-free delivery
Safely receive your product in days not weeks
prdt-icon-secure.svg
Secure transactions
SSL encrypted payment and data gateway
icon-returns.svg
Total satisfaction
Lightning-quick customer service with a 30-day refund policy

Oils, waxes, soaps, fats and varnishes thicken in a cold drum and stop pouring. A silicone drum heater band straps around the drum wall and brings the contents back to a temperature at which they can be pumped or poured, without moving the drum to a warm room or decanting it into a heated vessel. The Eco range does this at a low power density — heat goes in slowly and evenly, which suits products that benefit from a gentler warm-up.

The band is glass-fibre reinforced silicone with PFA-coated resistance wire laid widthways through it, so heat reaches the drum across the full width of the band instead of in stripes. It is held against the drum by a hook and spring, and carries its own thermostat and 2 m cable. Nothing is permanently mounted: the band comes off the drum as quickly as it went on and moves to the next one.

Purpose — a cold drum that will not empty

A drum that has stood in an unheated store or outside over winter behaves differently from the same drum indoors. Viscosity climbs, the product clings to the drum wall, and what should be a five-minute transfer becomes an hour of scraping — or the drum is written off with ten kilos still in it. Fats and waxes go solid outright and cannot be pumped at all.

A band on the drum wall transfers heat directly through the steel, warming the product without having to move the drum to a heated room or transfer it to another vessel.

How it works in practice

Match the band to the drum diameter, hook it round the drum and let the spring pull it tight against the wall. The band must sit flat against bare steel — an air gap, a label ridge or a rolling hoop under the band all cost heat transfer and make the thermostat read the wrong thing. Set the thermostat to the temperature the product tolerates, not to the highest setting; the dial is the limit, and the band will hold there rather than climb past it.

One to three bands can run on the same drum, depending on drum size, fill level, product properties and the time available for heating. Fit each band where it sits flat against the steel and where there is product behind the drum wall.

Key features

  • Low power density — the Eco range heats gently, so temperature-sensitive products are not overshot while they warm through
  • PFA-coated resistance wire laid widthways — even heat across the band and a coating that survives the wear that shortens the life of cheaper bands
  • Glass-fibre reinforced silicone body — stays flexible on the drum and tolerates repeated fitting and removal
  • Hook-and-spring fixing — one band fitted or moved in about a minute, with no tools and nothing left on the drum
  • Capillary thermostat on every band — each band on a drum is set and controlled independently
  • Class II double-insulated with a 2 m HO7RN-F cable — plugs into a standard 230 V supply

Certification & Approvals

  • CE marked
  • IP40
  • Class II, double-insulated
  • Not ATEX rated — not for use in classified hazardous areas

Technical Specifications

  • Heating element: PFA-coated resistance wire
  • Body: glass-fibre reinforced silicone
  • Control: capillary thermostat, 0–120 °C
  • Voltage: 230 V
  • Power: 330–930 W by size
  • Drum sizes: 25 L, 60 L, 120 L and 200 L
  • Band widths: 125 mm and 180 mm
  • Band lengths: 810, 1060, 1380 and 1695 mm
  • IP rating: IP40
  • Power cable: 2 m HO7RN-F
  • Fixing: hook and spring

Applications

  • Restoring pourability in drums of oils, hydraulic fluid and lubricants stored cold
  • Melting and holding waxes, fats and soaps that have set solid in the drum
  • Bringing varnishes, resins and coatings to application viscosity before spraying or mixing
  • Holding a drum at working temperature over a shift so the pump does not have to restart from cold
  • Food products in closed steel drums that need gentle warming rather than fast heat

Operational Requirements

  • For steel drums. The hook-and-spring fixing and the heat transfer both depend on a rigid metal wall
  • The band must sit flat against the drum with no air gap behind it
  • Set the thermostat to the temperature the product tolerates — that setting is the limit, not the band
  • IP40: for indoor industrial use, not for washdown or wet locations
  • Industrial use only — to be operated by trained personnel familiar with heating-equipment safety
  • Not suitable for classified hazardous (ATEX) areas

Selection guidance

Choose Eco where the product is the sensitive part and time is not critical: it puts in less power per square centimetre, so heat is introduced more gradually for products that benefit from a gentler warm-up. Where a drum has to be at temperature fast, the Performance range applies the same heat at a higher power density. Where overshooting would damage the product, the Digital range holds the setpoint closely with a digital thermostat. Underneath, all three are the same band: the same silicone, the same wire, the same fixing and the same cable.

Model Variants

The same band is available in two other ranges. The Performance range applies a higher power density, for drums that have to be at temperature quickly, and the Digital range uses a digital thermostat, where the setpoint has to be held closely. Need a different drum heating principle altogether? See the full drum heater range.

HeatXperts
HXP-3010-ECO

Data sheet

Length
810 mm.
Width
125 mm.
IP Class
IP40
Power rating
330 Watt
Temperature controller
Analogue
Temperature range
0 - 120°C
Voltage
230V
Compatible with
25-30 Liter drum
Drum compatible
Metal

Specific References

EAN13
0705808359687

You might also like