Free shipping inside European Union on all orders above 499€
My Account
Products
There are 209 products.
-
ATEX Cable Reel CR27 – 1× 3-Pole + 1× 5-Pole 16A, 20 m
- ATEX cable reel for Zone 1 and Zone 2 hazardous gas atmospheres
- 20 m EPR/PUR cable, 5x2.5 mm²
- 1× 3-pole 16A flange socket (6h) + 1× 5-pole 16A flange socket (6h)
- 1× 5-pole 16A plug (6h)
- Certified II 2G Ex db eb IIC T6 Gb
- PTB 20 ATEX 1009 & IECEx PTB 20.0015
- IP65-rated, robust industrial construction
- Manufactured in Switzerland by Thuba AG
€3,279.00 1-2 days- ATEX cable reel for Zone 1 and Zone 2 hazardous gas atmospheres
- 20 m EPR/PUR cable, 5x2.5 mm²
- 1× 3-pole 16A flange socket (6h) + 1× 5-pole 16A flange socket (6h)
- 1× 5-pole 16A plug (6h)
- Certified II 2G Ex db eb IIC T6 Gb
- PTB 20 ATEX 1009 & IECEx PTB 20.0015
- IP65-rated, robust industrial construction
- Manufactured in Switzerland by Thuba AG
-
ATEX Grounding Reel – 10 m / 25 m
- ATEX grounding reel for temporary equipotential bonding
- Prevents electrostatic discharge in hazardous areas
- Approved for Zone 1, 2 (Gas) and Zone 21, 22 (Dust)
- Certified II 2G Ex h IIC T6 Gb & II 2D Ex h IIIC T80°C Db
- Available in 10 m and 25 m versions
- IP54-rated housing with automatic retracting mechanism
- Operating temperature: -40°C to +60°C
€889.00 1-2 days- ATEX grounding reel for temporary equipotential bonding
- Prevents electrostatic discharge in hazardous areas
- Approved for Zone 1, 2 (Gas) and Zone 21, 22 (Dust)
- Certified II 2G Ex h IIC T6 Gb & II 2D Ex h IIIC T80°C Db
- Available in 10 m and 25 m versions
- IP54-rated housing with automatic retracting mechanism
- Operating temperature: -40°C to +60°C
-
FlexDeck Board Bending Heater
- FlexDeck™ professional heating blanket for deck board bending
- Uniform heat distribution across full board length
- Integrated PT100 sensor with digital controller
- Single insulated blanket – no external insulation required
- Available in 120V (60 Hz) and 230V versions
- Designed for boards up to 5400 mm
€3,795.00 1-2 days- FlexDeck™ professional heating blanket for deck board bending
- Uniform heat distribution across full board length
- Integrated PT100 sensor with digital controller
- Single insulated blanket – no external insulation required
- Available in 120V (60 Hz) and 230V versions
- Designed for boards up to 5400 mm
-
Over-the-Side Immersion Heater - 1500W
- 1500W over-the-side immersion heater with tubular elements Ø8.5 mm in acidproof stainless steel EN 1.4404 (AISI 316L)
- Designed for heating liquids in open vessels — buckets, barrels, tubs and similar containers
- Built-in adjustable thermostat 30–90°C with freeze protection
- IP 67 rated — fully protected against dust ingress and temporary immersion
- CE marked — compliant with LVD 2006/95/EC, EMC 2004/108/EC, RoHS 2011/65/EU and EN 60335-1
€299.00 1-2 days- 1500W over-the-side immersion heater with tubular elements Ø8.5 mm in acidproof stainless steel EN 1.4404 (AISI 316L)
- Designed for heating liquids in open vessels — buckets, barrels, tubs and similar containers
- Built-in adjustable thermostat 30–90°C with freeze protection
- IP 67 rated — fully protected against dust ingress and temporary immersion
- CE marked — compliant with LVD 2006/95/EC, EMC 2004/108/EC, RoHS 2011/65/EU and EN 60335-1
-
Submersible Oil Heater
- Submerged heating element for hydraulic and gear oil tanks
- Stainless steel tube, IP68 rated
- 250W, 500W, or 1000W — at 230V AC or 24V DC
- Built-in fixed thermostat: 40°C cut-off, ≥30°C switch-on
- CE approved
€599.00 1-2 days- Submerged heating element for hydraulic and gear oil tanks
- Stainless steel tube, IP68 rated
- 250W, 500W, or 1000W — at 230V AC or 24V DC
- Built-in fixed thermostat: 40°C cut-off, ≥30°C switch-on
- CE approved
-
Jessberger Lab Pump Set JP-125 PP for Chemicals
- Flow rate up to 20 l/min — designed for laboratory and light industrial transfer
- For acids, alkalis and detergents from narrow-neck containers
- PP pump tube Ø 25 mm with Hastelloy shaft for chemical resistance
- Includes 2 m PVC hose and PP nozzle — complete plug-and-play set
- JP-120 motor: 250 W, 230 V, IP 24 — viscosity up to 200 mPas
€479.00 2-5 days- Flow rate up to 20 l/min — designed for laboratory and light industrial transfer
- For acids, alkalis and detergents from narrow-neck containers
- PP pump tube Ø 25 mm with Hastelloy shaft for chemical resistance
- Includes 2 m PVC hose and PP nozzle — complete plug-and-play set
- JP-120 motor: 250 W, 230 V, IP 24 — viscosity up to 200 mPas
-
Circular Kapton Heater — Polyimide Etched-Foil
- Round etched-foil heating element sealed in polyimide (Kapton) film, just 0.2 to 0.3 mm thick — for discs, end caps and sensor bodies
- 12 V DC, −40 to +200 °C, very low outgassing tested to ASTM E595 — at home in vacuum, semiconductor, medical and battery work
- Two diameters, Ø 50 and Ø 75 mm, each in a lower and a higher power level
- Self-adhesive (3M PSA, to about 180 °C) or plain backing for clamped mounting to 200 °C
- Silicone-free, fast to respond and low in thermal mass; custom shapes, higher watt density and mains voltage available
€59.00 4-6 days- Round etched-foil heating element sealed in polyimide (Kapton) film, just 0.2 to 0.3 mm thick — for discs, end caps and sensor bodies
- 12 V DC, −40 to +200 °C, very low outgassing tested to ASTM E595 — at home in vacuum, semiconductor, medical and battery work
- Two diameters, Ø 50 and Ø 75 mm, each in a lower and a higher power level
- Self-adhesive (3M PSA, to about 180 °C) or plain backing for clamped mounting to 200 °C
- Silicone-free, fast to respond and low in thermal mass; custom shapes, higher watt density and mains voltage available
-
Rectangular Kapton Heater — Polyimide Etched-Foil
- Etched-foil heating element sealed in polyimide (Kapton) film, just 0.2 to 0.3 mm thick — adds heat where a conventional heater will not fit
- 12 V DC, −40 to +200 °C, very low outgassing tested to ASTM E595 — at home in vacuum, semiconductor, medical and battery work
- Seven rectangular sizes from 25 × 50 to 75 × 100 mm, each in a lower and a higher power level
- Self-adhesive (3M PSA, to about 180 °C) or plain backing for clamped mounting to 200 °C
- Silicone-free, fast to respond and low in thermal mass; custom shapes, higher watt density and mains voltage available
€49.00 4-6 days- Etched-foil heating element sealed in polyimide (Kapton) film, just 0.2 to 0.3 mm thick — adds heat where a conventional heater will not fit
- 12 V DC, −40 to +200 °C, very low outgassing tested to ASTM E595 — at home in vacuum, semiconductor, medical and battery work
- Seven rectangular sizes from 25 × 50 to 75 × 100 mm, each in a lower and a higher power level
- Self-adhesive (3M PSA, to about 180 °C) or plain backing for clamped mounting to 200 °C
- Silicone-free, fast to respond and low in thermal mass; custom shapes, higher watt density and mains voltage available
-
Roco Plug-In Energy Meter - 230V / 16A
- MID-compliant single-phase kWh meter — readings are valid for billing and insurance claims
- Fits inline between socket and equipment: Schuko plug in, Schuko coupling out, 1.5 m cable at each end
- Non-resettable 5+1-digit roller counter, readable through the housing window, up to 99,999.9 kWh
- IP44 splash-proof housing, -25 °C to +55 °C, with integrated hanging bracket
- 230 V / 16 A / max. 3.5 kW, with S0 pulse output at 1000 imp/kWh
€149.00 1-2 days- MID-compliant single-phase kWh meter — readings are valid for billing and insurance claims
- Fits inline between socket and equipment: Schuko plug in, Schuko coupling out, 1.5 m cable at each end
- Non-resettable 5+1-digit roller counter, readable through the housing window, up to 99,999.9 kWh
- IP44 splash-proof housing, -25 °C to +55 °C, with integrated hanging bracket
- 230 V / 16 A / max. 3.5 kW, with S0 pulse output at 1000 imp/kWh
-
Silicone Drum Heater Band - Eco | 330-930 W
- Straps directly onto a steel drum with a hook and spring — no jacket, no lid, fitted or moved in a minute
- Low power density that raises and holds temperature slowly, for products that must not be pushed
- Capillary thermostat in its own control box on every band, adjustable 0–120 °C
- Five sizes covering 25 L to 200 L drums, in 125 mm and 180 mm band widths
- 230 V · 330–930 W · IP40 · Class II double-insulated · 2 m HO7RN-F cable
€199.00 4-6 days- Straps directly onto a steel drum with a hook and spring — no jacket, no lid, fitted or moved in a minute
- Low power density that raises and holds temperature slowly, for products that must not be pushed
- Capillary thermostat in its own control box on every band, adjustable 0–120 °C
- Five sizes covering 25 L to 200 L drums, in 125 mm and 180 mm band widths
- 230 V · 330–930 W · IP40 · Class II double-insulated · 2 m HO7RN-F cable
-
Silicone Drum Heater Band - Digital | 300-2000 W
- Digital thermostat with display for accurate, stable heating where overshooting would damage the product
- Same band as the Performance range — high power applied evenly across the full band width
- Straps directly onto a steel drum with a hook and spring — no jacket, no lid, fitted or moved in a minute
- Seven sizes covering 25 L to 200 L drums; 0–120 °C, and 0–150 °C on the 2000 W model
- 230 V · 300–2000 W · IP40 · Class II double-insulated · 2 m HO7RN-F cable
€399.00 4-6 days- Digital thermostat with display for accurate, stable heating where overshooting would damage the product
- Same band as the Performance range — high power applied evenly across the full band width
- Straps directly onto a steel drum with a hook and spring — no jacket, no lid, fitted or moved in a minute
- Seven sizes covering 25 L to 200 L drums; 0–120 °C, and 0–150 °C on the 2000 W model
- 230 V · 300–2000 W · IP40 · Class II double-insulated · 2 m HO7RN-F cable
-
Silicone Drum Heater Band - Performance | 300-1500 W
- High-powered heating applied evenly across the band, to bring a drum up to temperature without hotspots
- Straps directly onto a steel drum with a hook and spring — no jacket, no lid, fitted or moved in a minute
- Capillary thermostat in its own control box on every band, adjustable 0–120 °C
- Six sizes covering 25 L to 200 L drums, in 125 mm and 180 mm band widths
- 230 V · 300–1500 W · IP40 · Class II double-insulated · 2 m HO7RN-F cable
€249.00 4-6 days- High-powered heating applied evenly across the band, to bring a drum up to temperature without hotspots
- Straps directly onto a steel drum with a hook and spring — no jacket, no lid, fitted or moved in a minute
- Capillary thermostat in its own control box on every band, adjustable 0–120 °C
- Six sizes covering 25 L to 200 L drums, in 125 mm and 180 mm band widths
- 230 V · 300–1500 W · IP40 · Class II double-insulated · 2 m HO7RN-F cable