Jessberger Lab Pump Set JP-132 SS with PVC Hose for Chemicals

The JP-132 SS is the standard stainless steel member of the JP-132 range — the choice when the process requires metal wetted parts but the media and accessories stay within PVC and PP compatibility. The 316Ti stainless steel tube handles diluted acids and alkalis, ammonia, thin liquid foods, hydraulic oils and machine oils at temperatures up to 90°C. The set is completed with a PVC hose and a PP nozzle with PTFE seal, keeping the complete fluid path within the familiar PP/PVC compatibility range while the SS tube brings the higher temperature ceiling and food-grade material contact.

Purpose — SS tube compatibility with standard hose and nozzle accessories

Where the JP-132 PP is limited to 50°C, the 316Ti stainless steel tube extends the working temperature to 90°C for the same range of diluted acids, alkalis and cleaning agents. The SS tube also opens liquid food transfer — fruit juices, edible oils and milk — where PP is not food-grade. The PVC hose and PP nozzle keep the accessory wetted materials consistent with what operators already know from the PP version. For applications where solvents or flammable organic media are involved, the JP-132 SS Chem with its universal chemical hose and brass/PTFE nozzle is the correct choice.

How it works in practice

The JP-140 motor drives a stainless steel shaft connected to an axial impeller at the base of the 316Ti pump tube. Available in 700, 1000 and 1200 mm — the 1200 mm length covers full IBC depth. The motor attaches via connection thread G 1¼". The ¾" (DN 19) outlet connects to the 2 m PVC hose included. The PP nozzle with ¾" PTFE seal completes the fluid path.

Key features

• Stainless steel 316Ti pump tube Ø 32 mm — for diluted acids/alkalis, ammonia, liquid food and oils at up to 90°C
• Available in 700, 1000 and 1200 mm — 1200 mm for full IBC depth
• JP-140 motor, 450 W — sustained high-flow output, 400 mPas viscosity
• PVC hose ¾\" 2 m — standard chemical and water compatibility
• PP nozzle with PTFE seal — compatible with acids, alkalis and cleaning agents
• Connection thread G 1¼" — larger than PP/PVDF versions
• Max. temperature 90°C — nearly double the PP version limit
• Low voltage release switch and thermal motor protection

Certification & Approvals

• Protection class IP 24
• Double insulated, category II
• CE marked

Technical Specifications

• Motor: JP-140, 230 V, 50/60 Hz, 450 W
• Protection class: IP 24
• Drive shaft: Stainless steel 316Ti
• Pump tube material: Stainless steel 316Ti
• Pump tube outer diameter: Ø 32 mm
• Connection thread: G 1¼"
• Hose connection: ¾" (DN 19)
• Hose included: 2 m PVC hose ¾"
• Nozzle included: PP ¾", PTFE seal
• Flow rate: Up to 49 l/min
• Head: 10 m
• Max. temperature: 90°C
• Max. viscosity: 400 mPas
• Max. density: 1.3
• Pump tube length: 700 mm / 1000 mm / 1200 mm
• Cable length: 5 m with plug

Typical media for SS 316Ti with PVC/PP accessories

• Diluted acids and alkalis, ammonia water
• Cleaning agents, disinfectants, liquid fertilizers
• Thin liquid food — fruit juices, edible oils, milk
• Drilling emulsions, hydraulic oils, machine oils
• Water, saline solutions, distilled water

Applications

• Chemical processing — diluted acids, alkalis and cleaning agents at elevated temperature
• Food and beverage — transfer of thin liquid food products
• Water treatment — concentrated disinfection chemicals
• Industrial maintenance — hydraulic fluids, machine oils
• Pharmaceutical and fine chemical production

Operational Requirements

• The impeller must be fully submerged during operation — do not run the pump dry
• Maximum medium temperature: 90°C
• Maximum viscosity: 400 mPas
• Container inner opening must accommodate Ø 32 mm tube with G 1¼" thread (approx. 40 mm minimum)
• Not suitable for solvents or flammable organic media — use JP-132 SS Chem for those
• Not suitable for highly concentrated mineral acids — use JP-132 PVDF for those