Jessberger Drum Pump Set JP-360 for Chemicals

IBC & Drum Pump Set with an electric motor for light acids and alkalis

The JP-360 Drum pump set is a preassembled drum pump set for 200L drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). The drum and IBC pump is suitable for neutral, aggressive, and hardly combustible liquids. It is used specifically for pumping aggressive chemicals such as acids, alkalis, or detergents

This pre-assembled drum pump set is a complete plug-and-play kit where everything you need to get started is included in the package. Simply unpack, install and turn the power on and you are ready to use your new electrical drum pump.

The drum pump motor is characterized not only by its light weight (3,6 kg) but also by its elegant and ergonomic design and ease of use. The non-stationary and stationary usable drive is particularly suitable for intermittent operation. The internally ventilated motor provides optimal air cooling, and a low noise level and ensures high operational safety and long durability.

The motor housing made of polypropylene ensures high chemical resistance when aggressive vapors of acids and alkalis are present. With an IP55 Class this housing is protected from limited dust ingress and from low pressure water jets from any direction.

The motor has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.

The pump tube is made of polypropylene (PP). This material is for aggressive media such as acids, alkalies, and detergents. Maximum temperature 50°C.

On the drum pump housing, an integrated low voltage release on/off switch is installed. This switch is intended to prevent an uncontrolled start of the drum pump motor after a power failure or voltage drop and thus guarantees maximum safety. 

The Jessberger drum pumps operate on the principle of the axial-impeller pumps. The pump unit consists of a drive motor and pump. The motor drives the drive shaft via a coupling. At the end of the drive shaft, there is a propeller-like pump impeller (rotor). The rotor must be completely covered with the medium so that the pump can work. With the rotation, the medium is axially transferred to the outlet, i.e. parallel to the pump shaft.

Each of our drum pump sets consists of an electric drum pump motor, a pump tube suitable for the application, a two-meter media-proof dispensing hose, and a nozzle, which facilitates filling and transferring.

Drum & IBC pump media examples:

• Acids
• Alkalis
• Detergents
• Formic acid (50%)
• Ammonia
• Boric acid
• Distilled water
• Liquid fertilizers
• Iron-II and III-chloride
• Acetic acid (80%)
• Photo developers
• Fruit acids
• Potassium hydroxide
• Copper chloride
• Lactic acid
• Sodium hydroxide
• Phosphoric acid
• Hydrochloric acid
• Sulfuric acid (up to 90%)
• Hydrogen peroxide
• Citric acid
• Many others…

Suitable for:

• Chemistry
• Water treatment
• Agriculture
• Petro Chemistry
• Surface technology
• Other industries

Technical data:

JP-360 PP (HC) Universal motor 230 V, 50 Hz, 640 W, IP 55, protection class I, with low voltage release, on/off switch, 5 m cable with plug.

Pump tube:

• Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
• Connection thread G 1¼”
• Hose connection 1″ (DN 25)
• 2 m PVC hose 1″ (DN 25)
• 2 Hose clamps stainless steel
• 1 Nozzle polyprop­ylene 1″