ATEX Base Heater 200L 240V/300W T5 (100C) ~40C

Introducing our ATEX Base Heater for 200L Drums, designed specifically for maintaining the temperature of media in hazardous environments. With our extensive expertise in ATEX products, this base drum heater ensures maximum safety and reliability, meeting the stringent requirements of ATEX Directive 2014/34/EU. Constructed from a robust aluminum plate and equipped with self-regulating heating cable technology, the heater provides consistent and even heat distribution. The integrated digital thermostat allows for precise temperature control, making it ideal for various industrial applications such as maintaining the flow of viscous liquids, heating chemicals, or storing sensitive materials that require stable temperatures.

Our ATEX Base Heater is perfect for use in chemical processing plants, oil refineries, and other industrial settings where hazardous gases may be present. The unit's IP66 rating ensures it can withstand wet and harsh weather conditions, providing reliable performance in outdoor environments. The conductive castors facilitate easy transportation and handling of the heater, ensuring it can be positioned exactly where needed.

1235-99930144 ATEX Base Heater (240V/300W, T5, 40°C)
This low-temperature model is designed for gentle heating applications, rated for T5 (100°C) and operating at approximately 40°C. Featuring an encapsulated, externally mounted controller, this base heater is ideal for sensitive materials and processes that require precise and consistent heat at lower temperatures.

Technical Specifications:

• Area Classification Hazardous Area per ATEX Directive 2014/34/EU
• Zone 1 & 2 (Gas)
• Temperature Class T2 (300°C), T4 (135°C), T5 (100°C)
• Ambient Temperature Range -40°C to +50°C
• Unit Marking Ex e IIC T* Gb
• Norms EN, IEC Standards
• Height 75 mm for heating surface
• Length 1100 mm including conductive castors
• Outer Diameter 546 mm for heating surface
• Heater self-regulating heating cable
• Different power outputs depending on T-Class
• Including termination and end seal kits
• Ingress Protection IP66 to IEC 60529
• Thermal Insulation 50 mm mineral-fiber blanket
• Housing Mild steel, sheet metal, painted
• Color Outer surfaces structured blue
• Heating Plate Aluminium, anodized black
• Temperature Sensor PT100 to IEC 60751, intrinsically safe, integrated
• Ingress Protection Unit IP54 to IEC 60529
• Temperature Controller Electronic, encapsulated, externally mounted in enclosure
• Control Range 0°C to 500°C
• Ingress Protection IP66 to IEC 60529
• Electrical Protection Class I
• Maximum Operating Temperature 180°C (depending on Temperature Class)
• Nominal Supply Voltage AC 230 V 1-phase 50Hz
• Wiring and Supply Cable tear and notch resistant silicone rubber
• Supply Cable Length 3.0 m, flying leads